HOMEWATERGARDEN PRODUCTSEARTHEN POND PRODUCTSTECHNICAL INFORMATIONPHOTO GALLERY

POND SKIMMERS

Thousands of Pro-Series skimmers have been installed throughout North America. 
These heavy duty skimmers are one of the best selling skimmers on the market today.

  • Innovative design allows you to choose between a vertical filter mat or filter brushes.

  • Skimmers have a removable center divider, this creates two chambers in the skimmer box - one for filtering and one for the pump.  Pumps can be inspected or removed without removing mesh net or filter pad.

  • Pro-Series Skimmers have a flange above the opening where water enters from the pond into the skimmer.  This allows you to not only stack rocks along side the opening but also above the skimmer opening.  This makers our skimmers the most natural looking and easiest to hide.

  • Skimmers add a professional touch to any pond installation by providing an ideal place to hide the pump from view.  Internal filters inside the skimmer prevent the pump from plugging and are easy to clean.

  • Pro-Series Skimmers have a one piece debris net that's three times heavier than our competition's.  One piece design keeps mesh in place and is easier to clean.

  • Two chamber design means no more cutting filter pads to fit around the pump or plumbing.

 



Mini Skimmer
20" long x 15" wide x 19" tall
Our Best Selling Skimmer!


28" long x 18" wide x 20" tall
One of the largest skimmers available!

Large Skimmer
42" long x 20" wide x 30" tall
  • Skims ponds up to 250 square feet

  • Handles pumps up to 50 GPM (3,000 GPH)

  • 6" wide water inlet

  • Available in vertical style pad or filter brushes

  • Works with small extension tube 

  • Ships UPS

  • Skims ponds up to 600 square fee

  • Handles pumps up to 100 GPM (6,000 GPH)

  • 8" wide water inlet

  • Available with filter pad or filter brushes

  • PS1FB also can be fitted with a UV

  • Ships UPS at dimensional rates

  • Skims ponds up to 600 square feet

  • Handles pumps up to 250 GPM(15000 GPH)or multiple smaller pumps

  • 16" wide water inlet

  • Ships motor freight

Choose your skimmer with either a filter pad or filter brushes.  Filter brushes can be purchased to retrofit existing skimmers.

  Part # Description Price
  PSM Mini Skimmer w/filter pad $298.79
  PSMFB Mini Skimmer w/filter brushes $280.79
  PS1V Small skimmer w/ filter pad $389.39
  PS1FB Small skimmer w/filter brushes $384.39
  PS2V Large skimmer, vertical filter $667.39
  PS2FB Large skimmer, filter brushes $680.79
  PS2 Large skimmer w/o filter pad $647.79
       


Filter Brushes vs Filter Pads

 

 

 

 

 

 

 

 
Matala Filter Pad
   
 
Skimmer Stone Lid
   
 
Skimmer Debris Net
REPLACEMENT SKIMMER PARTS

  Part # Description Price
  PSMM Replacement Matala pad for mini $14.39
  PSMR Replacement filter brush rack for mini $51.79
  PMLN Replacement debris net for mini $24.79
  PSMLID Replacement lid for mini call
  PSMDV Replacement divider (holds filter pads) for mini call
  PSMFP Replacement faceplate for mini call
  PSMWR Replacement weir for mini call
  PS1VM Replacement Matala filter pad for small $16.29
  PS1R Replacement filter brush rack for small $70.79
  P1LN Replacement debris net for small $38.39
  PS1LID Replacement lid for small call
  PS1DV Replacement divider for small call
  PS1FP Replacement faceplate for small call
  PS1WR Replacement weir for small call
  PS2R Replacement filter brush rack for large $93.79
  PS2VM Replacement Matala filter pad for large $31.39
  P2LN Replacement debris net for large $45.39
  PS2LID Replacement lid for large call
  PS2DV Replacement divider for large call
  PS2FP Replacement faceplate for large call
  PS2WR Replacement weir for large call
             

 

UV OPTION FOR PS1FB SKIMMERS
The PS1FB skimmer can be outfitted with a UV Clarifier!  The 36 watt bulb is enclosed inside of a divider that slips in the place of the PVC divider that is located behind the filter rack.  The UV option must be used with filter brush racks NOT the filter pad style skimmers.  The UV option will drop the maximum GPM flow from 100 to approximately 60 GPM to provide adequate exposure time. 

Replacement UV bulbs and sleeves are available when needed.  All other parts last for years and years!

  Part # Description Ship Wt. Price
  PS1UV 36 watt UV upgrade for PS1 12 lbs $322.39
  EP36B 36 watt replacement bulb for PS1UV 3 lbs $64.39
  EP36S 36 watt replacement sleeve for PS1UV 3 lbs $85.39

 

 

 

 

CHOICE OF FILTERS
Choose your skimmer with either a filter pad or filter brushes.  Filter brushes can be purchased to retrofit existing skimmers. 

Filter brushes - Best Choice!
Filter brushes reduce cleaning frequency and are less restrictive so pumps are less likely to run low on water.  Brushes are very effective at removing solids from the water while allowing water to flow freely into the pump chamber.

Filter pads

Filter pads stand vertically in the skimmer (shown at right without debris net).  They can be easily lifted out for cleaning.

 

PRO-SERIES SKIMMER EXTENSION TUBE        

Extension tubes make your pond look much more natural by moving the skimmer box away from the pond!

This patented 24" long extension tube allows the skimmer to be placed back from the edge of the pond. This will allow for planting between the pond and skimmer making it easier to hide! Extension tubes can be bolted together to create longer extensions if needed. Price includes extension tube and bolts for installation.  Ideal for use in concrete walls.

  Part # Description Ship Wt. Price
  SETS Fits mini & small skimmer 9 lbs. $80.79
  SETL Fits large skimmer 12 lbs. $104.79

 

 

 
 
About Us    Request Catalog    Order InfoFish InfoLinks    Need Directions?

Copyright 2006. Stoney Creek Fisheries & Equipment Inc. All rights reserved.               ** This website is for informational purposes only.  All prices are subject to change.**

4385 East 110th Street | Grant, MI 49327 | Ph: (800) 448-3873 | Fx: (231) 834-5537